Car photography

Quality pictures sell well, and by experience faster as well. Carturner raises professional 360 photo production at new heights. Put the camera in a fixed position and shoot your photos as the car rotates on the turner. This lead to a more unidirectional picture base in a sales portfolio. The low profile of the Carturner make a pretty nice visual frame for the car in it’s surroundings as well.

The turner is accessable from all angles with the benefits of reduced manouvering, faster engine cut and less exhaust.  With it’s 72 panel integrated rolls the load capacity exceeds 3,5 tonns and opposit to. traditional turner concepts the load does not balance on center bearing. The Carturner is so simple to use that one individual easily both manouver the car, run it and shoot photo’s with no need for assistance. It’s available in both flush-mount and surface-mount version. The surface-mounteam version is assembled on top of excisting floor and do not require deep anchoring. Rotation speed is 1 ful turn in 45 seconds.  The power package consist of 6 pieces powerful 50W/24V engines with individual transmissions. The turner will run even with only 2 operating engines.  We keep turners in stock in anti skid powder coated and brushed stainless steel finishes.

Residential

Carturner is the most simple, reliable and powerful turntable. In driveways and garages with little manouvering space the turner can increase Space effectiveness. And with restricted property development dependent to parking capacity this can open for more housing units in a Project. If a driveway is narrow, curved and maybe lead directly into roads with severe traffic, the benefit of turning car and drive forward out is obvious. Not only reducing risk of car damage and scratches but also improve pedestrian safety.

The turner is accessable from all angles with the benefits of reduced manouvering, faster engine cut and less exhaust.  With it’s 72 panel integrated rolls the load capacity exceeds 3,5 tonns and opposit to. traditional turner concepts the load does not balance on center bearing. The Carturner is so simple to use that one individual easily both manouver the car and run the turner. With wireless control it’s not necessary to leave the car for turning. It’s avilable in both flush-mount and surface-mount version. The surface-mounteam version is assembled on top of excisting floor and do not require deep anchoring. Rotating speed is 1 ful turn in 45 seconds.  The power package consist of 6 pieces powerful 50W/24V engines with individual transmissions. The turner will run even with only 2 operating engines. And it turns even in 10 degrees slopes.  We keep turners in stock in anti skid powder coated and brushed stainless steel finishes.

Exhibitions

Carturner represent a spectacular turning display that will bring your car expo stand to the top. The spectators can focus on, observe and absorbe the displayed car design and details all way round from one position. A huge efforth in crowded busy surroundings. It is then easier for stand personel to approach prospects too. Through it’s noiceless turning Carturner enlivens the car and make it “ask for attention”. The low 8 cm. profile of the turner also represent a nice visual frame around the car.

The turner is accessable from all angles with the benefits of reduced manouvering, faster engine cut and less exhaust. It is then quite easy to access even with finished stand construction as it only require a 2,5 meter corridor for entry. With it’s 72 panel integrated rolls the load capacity exceeds 3,5 tonns and opposite to traditional turner concepts the load does not balance on center bearing. The surface-mount version is assembled on top of excisting floor and do not require deep anchoring. Rotating speed is 1 ful turn in 45 seconds. Special featured brushless engine package can be delivered with stepless speedcontrol from 1/2-1 turn in 45 Seconds.  The power package consist of 6 pieces powerful 50W/24V engines with individual transmissions. The turner will run even with only 2 operating engines.  We keep turners in stock in anti skid powder coated and brushed stainless steel finishes.

Demo video - click on the button and se video of assembly and construction

Looking for trouble? – don’t call us!